Electrochemistry of oxidized metal electrode 氧化金属电极电化学
Pyrotechnic Current Generator with Axial Metal Electrode 带有轴向金属电极的烟火电流发生器放电性能研究
Study on surface modification of lithium metal electrode with 1,3-dioxolane 用1,3-二氧戊环进行锂电极表面改性的研究
Exact and Approximate Solutions for Surface Acoustic Waves in Elastic Plate with Metal Electrode Layer 具有电极层无限大弹性板中表面波的精确与近似解
It be verified by two experiment in article that electric potential of first metal electrode be influenced by the surface smooth level of metal. 通过两个实验验证了金属表面的光滑度对第一类金属电极的电极电势的影响。金属表面粗糙会使第一类金属电极的电极电势降低。
The experiment results show that the activity for HER of the composite electrodes are higher than that of substrate metal electrode, the higher activity was mainly due to the increase in surface area of the electrodes. 实验结果表明,复合电极的电催化析氢性能高于基质合金电极,这主要归因于比表面积的增加。
The method and the significant of the measurement of metal electrode potential are described, and the results of the application and the research of this method in the monitoring metal corrosion and the water chemistry regime conditioning in thermal power unit are summarized in the paper. 论述了金属电极电位测量方法和意义,综述了该方法在火电机组水化学工况研究和金属腐蚀监测中的应用结果。
Using of reactive metal electrode has become a new method in electroorganic synthesis. 在有机电解合成中采用反应性金属电极近年来已成为这一领域的新分支。
Research on PEO-based dry solid polymer electrolytes for rechargeable lithium batteries was introduced from three aspects which were improving the conductivity, enhancing the number of lithium ion transference and modifying the stability of electrolyte/ lithium metal electrode interface. 从提高锂蓄电池聚环氧乙烷(PEO)基全固态聚合物电解质的电导率、锂离子迁移数和改善电解质与锂电极之间的界面稳定性三个方面介绍了其研究进展。
In the measuring experiment. we should exclude the influence of the contact resistance because it is so large between the organic semi-conductor material and the metal electrode. 有机半导体材料与金属电极间的接触电阻很大测量时应考虑到排除接触电阻的影响;
Study methods for relationship between electrode behavior and interface characters of corroding metal electrode and their development trend 腐蚀金属电极行为与其界面性能关系研究方法及发展趋势
When dielectric sheet ( polymer, semiconductor and so on) supported by a metal electrode are implanted by means of Plasma Immersion Ion Implantation ( PIII), the thickness and the potential profiles of ion-matrix sheath are studied. 该文研究了在等离子体浸没离子注入(PIII)中介质材料(高聚物、半导体等)为被注入对象时,其周围离子体鞘的扩展厚度和电势特征。
So developing a high activity and good stability material will be an important research goal, from previous documents, study many active cathodes including noble metal electrode, Raney Ni electrode, cobalt coating electrode, nickel alloy electrode, etc. 从文献上来看,已研究过的活性阴极包括贵金属电极、RaneyNi电极、镀钴电极、镍合金电极等。
Manufacturing Technology of Multi-layered Ceramic Capacitor with Base Metal Electrode 多层片式瓷介电容器贱金属电极的制造方法
The structure principle and development tendency of the technology for MLCC are introduced, and especially the development tendency of the MLCC regarding miniature, integration, high capacitance, base metal electrode, high frequency and performance and lead-free are described. 简单介绍了多层陶瓷电容器(MLCC)的结构,重点介绍MLCC微小型、复合化、大容量、贱金属化,高频、高性能和环保化(无铅化)的技术发展。
Among them, the metal electrode controlled potential sensor is a new type electrochemistry sensor suiting for on-line detecting ozone in water. 其中,金属电极控制电位型传感器是适合在线检测水中臭氧的新型电化学传感器。
The voltammetry of metal electrode was used for phase analysis of steel and alloy. The sensitivity and precision of the phase analysis were increased by a powder electrode consisting of extraction residue and metal. 金属电极伏安法可用于钢与合金的相分析,利用萃取残渣-金属型粉末电极提高了反应区活性相的浓度,从而提高了分析微量相的灵敏度和精密度。
The results indicate that the piezoelectricity of PVDF thin films and adhesion between polymer thin film and metal electrode are improved by electric poling and chemical bond joint, respectively. 电极化不仅改善了PVDF薄膜的压电性,还通过界面化学键合作用提高了聚合物薄膜与金属电极间的粘附性。
The electromagnetic enhancement mechanism for SERS on nano-roughened metal electrode is discussed. Besides, we also give some discussion over the metal dielectric constant, which plays important role for the electromagnetic enhancement mechanism for SERS. 我们还对纳米级粗糙金属电极上表面增强拉曼散射的电磁场增强机理,及在其中起重要作用的金属介电常数进行了讨论。
When using a metal electrode, if it is too thick, it will lead to the reduction of the transmittance; if it is too thin, its thermal stability and reliability get worse, its current diffusion becomes non-uniform, which leads to decreased device lifetime. 当使用金属材料制备电极时,如果厚度太大,会导致透光率的降低;如果厚度太小,则其热稳定性和可靠性变差,还会产生电流非均匀扩散问题,导致器件寿命下降。
The results was different from the metal electrodes '. It can change the mechanism on the metal electrode surface effectively. Electrochemical products contained formic acid. 结果与金属电极表面不同,它能够有效的改变裸金电极上CO2的还原机理,电化学产物包含甲酸。
We also studied the influence of the thermal oxidation process, the work function difference between the metal electrode and the contact area between the metal layers and the insulator layer to the electrical properties of the MIM diodes. 在此基础上,我们研究了热处理工艺、金属电极功函数差、金属与绝缘层接触面积对MIM二极管电学性能的影响。
The mainstream process to produce polysilicon is Siemens Process., in this process the graphite chuck is used to connect the initial filament silicon with the metal electrode to work as the basement for the silicon deposition, so there is some silicon attached to the graphite chuck. 西门子法是生产多晶硅的主流工艺,由于工艺中使用石墨夹头连接初始硅芯作为硅还原反应沉积基底,产品中存在沾附了石墨的多晶硅碳头料。
In the work, it was systemically studied that the effects of two suggested modifying ways on electrochemical characteristics of lithium metal electrode and its behaviors in lithium cell. 本论文系统地研究了以上两种锂电极改性方法分别对锂金属电极电化学行为及其在锂电池中性能的影响,并对这两种新型锂电极改性方法的作用机制进行了分析。
For Zn-containing solders, the solder joints could increase the electrochemical corrosion due to the high potential of Zn metal electrode. So, their corrosion resistances were clear weaker than Bi-Ag and Bi-Ag-Cu alloy systems. 而含Zn钎料由于金属Zn有着很高的电极电位,因此有存在电化学腐蚀的情况,使其的抗腐蚀性能明显的要弱于Bi-Ag和Bi-Ag-Cu合金体系。
Important information is that the distance between metal electrode and emitting layer must be suitable. Too large, difficult injection; too small, excitons quenching. 实验给出影响受激发射的重要信息:金属电极距增益区距离要适当,太大,器件厚,电注入困难;太小发光激子在电极猝灭。
The structure and invalidation pattern of the ceramic encapsulation capacitor were analyzed by means of scanning electron microscopy. The composition of metal electrode and ceramic medium layer was studied by the energy spectrometer. 利用扫描电镜观察了陶瓷封装电容器结构和失效形式,并利用能谱仪对金属电极、陶瓷电介质等进行了成分分析。
Meanwhile, the high k blocking layer along with the high work function metal electrode can effectively suppress the erase saturation. 同时,高k阻挡层和大功函数的金属电极一起能够有效的抑制擦除饱和现象。
Among them, many electric catalysis systems relates to noble metal electrode, such as platinum electrode. 其中,许多电催化体系都涉及铂等贵金属电极。